STANDARD UK-1100 | Knee Type Universal Milling Machine - STANDARD Direct

Miraco 3d Scanner now under $2000...

Miraco 3d Scanner now under $2000...

STANDARD UK-1100 Knee Type Universal Milling Machine


*Mills are built on order, delivery is approx 9~14 weeks
Prices include Sea Freight to your nearest port*
*Excludes Local Taxes*


A knee-type universal milling machine is a machine tool that has a vertically adjustable worktable that is mounted on a knee, which is a massive casting that rides vertically on the milling machine column. The knee-type milling machine has a horizontally oriented spindle that is parallel to the worktable, and the workpiece is clamped to the worktable using a vise or clamping device. The cutting tool is mounted on an arbor that is inserted into the spindle and is driven by a motor. The knee-type milling machine is capable of performing both conventional and climb milling operations and can be used to machine a wide variety of materials including metals, plastics, and composites.

Main Features:

  • Powerful HT200 cast iron machine bed with substantial ribbing provides exceptional rigidity.
  • Precisely machined guideways with hard layers for enduring accuracy and durability.
  • Boasts a generous work area of 1600x360mm and can withstand up to 450kg table load.
  • Constructed for quiet accuracy, the headstock gears possess hardened and ground edges for reliable performance.
  • High-torque servo motors enable precise and adjustable feeds along all three axes.
  • A 5.5kW main drive ensures powerful torque delivery.
  • Coolant system and chip tray supplied.
Machine Specifications
  • Table Size - 1325x320mm = 52.16 x 12.59in
  • X-Axis Travel - 1100mm = 43.3in
  • Y-Axis Travel - 320mm = 12.59in 
  • Z-Axis Travel - 450mm = 17.71in
  • Spindle Taper - 7:24 ISO50
  • X-Axis Rapid Traverse - 1200mm/min = 47.24in/min
  • Y-Axis Rapid Traverse - 800mm/min = 31.49in/min
  • Z-Axis Rapid Traverse - 600mm/min = 23.62in/min
  • X-Axis Speed - 30-750mm/min = 1.18-29.52in/min
  • Y-Axis Speed - 20-500mm/min = 0.78-19.68in/min
  • Z-Axis Speed - 15-375mm/min = 0.59-14.76in/min
  • T-Slot - 18x70mm (3) = 0.70 x 2.75in (3)
  • Spindle Speed Range - 60-1800rpm
  • Distance Between Table and Spindle - 20-470mm = 0.78-18.5in
  • Arm Travel - 500mm  19.68in
  • Distance Between Spindle Axis to Column - 175mm = 6.88in
  • Main Motor Power - 5.5kW = 7.5hp
  • Servo Motor Torque - 10Nm = 88.5 in-lbs
  • Size - 2245x2100x1870mm = 88.38 x 82.67 x 73.62in
  • Weight - 2450kg = 5400 lbs

Delivery is 8-12 Weeks from Deposit

How to use a Knee Type Universal Milling Machine

Using a knee-type universal milling machine involves the following steps:

  1. Set up the workpiece: Secure the workpiece to the worktable using a vise or clamping device. Make sure that it is level and properly aligned.

  2. Select the cutting tool: Choose the appropriate cutting tool for the operation and mount it on the arbor. Make sure that it is tightened securely and that the tool is properly aligned with the spindle.

  3. Adjust the spindle speed: Set the spindle speed to match the recommended speed for the cutting tool and the material being machined.

  4. Adjust the feed rate: Set the feed rate to match the recommended speed for the cutting tool and the material being machined.

  5. Start the machine: Turn on the machine and lower the cutting tool onto the workpiece using the knee.

  6. Perform the operation: Use the handles on the knee to control the movement of the cutting tool. Make sure to keep your hands clear of the cutting tool and to use the appropriate safety equipment.

  7. Stop the machine: When the operation is complete, turn off the machine and raise the cutting tool away from the workpiece.

  8. Clean up: Clean up any chips or debris from the work area and properly store the cutting tool.

It's important to always refer to the machine manual for specific instructions and safety guidelines before operating any machine.


*Information shown may differ or change without warning*

Product Search