A hydraulic garage press with press brake tool is a powerful machine used in metalworking and fabrication industries to bend, shape, and form metal sheets and plates. It is essentially a hydraulic press that is equipped with a press brake tool, which enables it to perform precision bending and forming operations.
The press brake tool consists of a V-shaped die and a punch, which are mounted on the press bed and ram respectively. The metal sheet or plate is placed between the die and punch, and the hydraulic pressure is applied to the ram to bend the material to the desired angle. The hydraulic system provides the force needed to perform the bending operation, and the press brake tool ensures accurate and consistent bending angles.
The hydraulic garage press with press brake tool is capable of performing a wide range of metalworking operations, including bending, shearing, punching, and forming. It is commonly used in automotive and construction industries to manufacture metal components such as brackets, chassis, and frames.
The machine's hydraulic system is powered by an electric motor, which pumps hydraulic fluid into the hydraulic cylinders, creating the force needed for the bending operation. The hydraulic system also includes a pressure relief valve to prevent overloading the machine and ensure safe operation.
Overall, a hydraulic garage press with press brake tool is a versatile and powerful machine that enables metalworking professionals to perform precise and efficient bending and forming operations on metal sheets and plates.
Build on demand only
Delivery is 7-12 Weeks from Deposit
Using a hydraulic garage press with press brake tool requires some knowledge and experience in metalworking.
Here are the general steps for using this machine:
Choose the appropriate press brake tool for the desired bending angle and the thickness of the metal sheet or plate.
Position the metal sheet or plate between the V-shaped die and the punch, ensuring that it is centered and aligned with the press brake tool.
Adjust the back gauge to the desired distance from the die to ensure accurate and consistent bending.
Set the pressure and stroke length of the hydraulic system according to the material's thickness and desired bending angle.
Turn on the machine's power and ensure that all safety features are engaged, such as the emergency stop button.
Activate the hydraulic system by pressing the foot pedal or operating the control panel, which will cause the ram to lower and apply pressure to the metal sheet or plate.
Release the foot pedal or control panel when the desired bending angle is achieved.
Remove the bent metal sheet or plate and repeat the process for any additional bends or forming operations.
Turn off the machine's power and ensure that it is properly maintained and cleaned after use.
It is important to follow all safety guidelines and manufacturer instructions when using a hydraulic garage press with press brake tool to ensure safe and efficient operation. Proper training and experience in metalworking are also essential for using this machine effectively.
*Information shown may differ or change without warning*