Miraco 3d Scanner now under $1500...
Miraco 3d Scanner now under $1500...
Standard SGH-12x3200 Hydraulic Guillotine:
High quality hydraulic swing beam guillotine with ESTUN E21 back gauge controller. Metal cutting capacity of up to 12mm thick (Mild steel) with a sheet of 3200mm.
STANDARD SGH-Series guillotines are very established in the local market, their strong construction and use of big brand components make for a good allrounder. Component list: ESTUN NC controller, motorized back gauge, SUNNY silent hydraulic pump, NOK Seals, REXROTH hydraulics valves, VEX high chrome tooling and SCHNEIDER electrical components
Our operators opinion of SGH-12x3200:
"First impression, its well finished with no Chinese labels - This means allot when you understand the quality grading system in China"
"The build quality is good all-round and everything runs well, cutting is smooth without hesitation or frame flex.Low Price and Strong Build = Bang for your Buck!"
Why buy your next Guillotine from us?
Strictly Build-on-Demand/Order
Delivery is 8-12 Weeks from Deposit
A hydraulic guillotine is a machine used for cutting sheet metal. To use one, follow these steps:
Install the cutting blade and set the cutting depth according to the thickness of the metal you will be cutting.
Align the metal sheet with the cutting edge of the blade. Use the rulers or guides on the machine to ensure that the sheet is straight and properly aligned.
Turn on the machine and press the button or lever to activate the hydraulic cylinder, which will lower the blade and cut through the metal.
Release the button or lever to stop the cutting process.
Turn off the machine and carefully remove the cut piece of metal.
Always wear protective gear, such as safety glasses and gloves, when operating a hydraulic guillotine.
Always follow the manufacturer's instructions for safe operation and maintenance of the machine.
It's important to note that operating a guillotine is dangerous and should only be done by trained professionals. If you are unsure or inexperienced, it is best to seek help from a professional or an expert.
Machine Specialists
International Sales
Online Support
Superior Quality Products
Standard SGH-12x3200 Hydraulic Guillotine:
High quality hydraulic swing beam guillotine with ESTUN E21 back gauge controller. Metal cutting capacity of up to 12mm thick (Mild steel) with a sheet of 3200mm.
STANDARD SGH-Series guillotines are very established in the local market, their strong construction and use of big brand components make for a good allrounder. Component list: ESTUN NC controller, motorized back gauge, SUNNY silent hydraulic pump, NOK Seals, REXROTH hydraulics valves, VEX high chrome tooling and SCHNEIDER electrical components
Our operators opinion of SGH-12x3200:
"First impression, its well finished with no Chinese labels - This means allot when you understand the quality grading system in China"
"The build quality is good all-round and everything runs well, cutting is smooth without hesitation or frame flex. Low Price and Strong Build = Bang for your Buck!"
Why buy your next Guillotine from us?
Strictly Build-on-Demand/Order
Delivery is 8-12 Weeks from Deposit
A hydraulic guillotine is a machine used for cutting sheet metal. To use one, follow these steps:
Install the cutting blade and set the cutting depth according to the thickness of the metal you will be cutting.
Align the metal sheet with the cutting edge of the blade. Use the rulers or guides on the machine to ensure that the sheet is straight and properly aligned.
Turn on the machine and press the button or lever to activate the hydraulic cylinder, which will lower the blade and cut through the metal.
Release the button or lever to stop the cutting process.
Turn off the machine and carefully remove the cut piece of metal.
Always wear protective gear, such as safety glasses and gloves, when operating a hydraulic guillotine.
Always follow the manufacturer's instructions for safe operation and maintenance of the machine.
It's important to note that operating a guillotine is dangerous and should only be done by trained professionals. If you are unsure or inexperienced, it is best to seek help from a professional or an expert.