Standard AF-10C Pneumatic Feeder:
The AF pneumatic air feeder machine is an efficient and economical coil feeder solutions for power press machines. It is able to feed sheet metal strips up to 3.0mm, width up to 400mm, with the speed of 12m/min. Having a group of stock guide rollers to adjust for different stock width, offering a feeding length adjustment screw for different coil feeding applications. The air feeder machine is cheaper than the roller feeders and it's the right choice for the feeder line that does not need very high precision performance.
Due to the many options offered, these machines are strictly built on order. Feel free to customize and build your ideal machine.
Delivery 10-14 Weeks from Deposit
A pneumatic feeder is a device used in industrial settings to feed parts or materials into a production process. Pneumatic feeders use compressed air to power the mechanism that moves parts from a storage bin to a conveyor belt or other processing equipment.
Here are the general steps to use a pneumatic feeder:
Prepare the Feeder: Before using a pneumatic feeder, ensure that it is clean and free from debris or other obstructions that could interfere with the flow of materials. Check the air supply and make sure that it is connected and functioning properly.
Load the Parts: Load the parts to be fed into the storage bin of the feeder. Make sure that the parts are arranged in an orderly fashion to ensure a consistent flow.
Set the Feeder Speed: Adjust the feeder speed to match the speed of the production process. This will ensure that the parts are delivered at a consistent rate.
Start the Feeder: Turn on the air supply and start the feeder. The parts should begin to move from the storage bin to the conveyor belt or other processing equipment.
Monitor the Feeder: Keep an eye on the feeder to ensure that it is functioning properly. Check the flow of parts to ensure that it is consistent and that there are no jams or other issues.
Adjust as Needed: If you encounter any problems with the feeder, such as inconsistent flow or jams, adjust the settings as needed to correct the issue.
Stop the Feeder: When the production process is complete, turn off the air supply and stop the feeder. Remove any remaining parts from the storage bin.
Clean the Feeder: After use, clean the feeder to ensure that it is ready for the next use.
It is important to follow the manufacturer's instructions and any applicable safety procedures when using a pneumatic feeder.
*Information shown may differ or change without warning*