Terms are DDP (Delivery, Duties Paid) in the USA, Canada and South Africa.

Terms are DDP (Delivery, Duties Paid) in the USA, Canada and South Africa.

Search Login
0 Cart

Phone - USA +1 855 550 0606

Search
0 Cart
Previous | Next
Standard HG-200 ton Hydraulic Garage Press, available from STANDARD or Standard Direct

STANDARD HG-200 Hydraulic Garage Press 200 tons

$14,711
Description

Standard HG-200 Hydraulic Garage Press with 200-ton Capacity:

A hydraulic garage press with a 200-ton capacity is a heavy-duty machine used for pressing and shaping metal or other materials. It uses hydraulic power to apply large amounts of force to a workpiece, making it ideal for tasks such as bending, straightening, and punching. The press typically features a large bed for the workpiece to rest on and two vertically-mounted cylinders that generate the pressing force. The press is operated using a pump that generates high pressure hydraulic fluid, which is then used to drive the cylinders and apply force to the workpiece. The 200-ton capacity refers to the maximum amount of force the press is capable of applying.

Main Features:

  • Easy to use and powerful press for most applications
  • Ideal for the repair of axles, shafts, & press fit of bearings & bushings
  • Ram speed down 6.7mm/sec, returns 5.0mm/sec
  • Heavy duty welded steel fabricated frame
  • Strong hydraulic cylinder ensures precise pressing during operation
  • Fitted with pressure gauge
  • Safety overload valve
  • Hydraulic joystick control lever
  • Powerful TEFC motor
  • Heavy duty one piece table plate insert
  • Extra heavy duty table support with high tensile setting pins
  • Table can be adjusted for height using chains and Hydraulic ram
Specification
  • Capacity - 2000 kN = 449612.7 lbs
  • Pressure - 31.5 MPa = 4568.08 psi
  • Piston Travel - 300 mm = 11.811 inches
  • Table Travel - 405 mm = 15.9449 inches
  • Table size - 500x1000 mm = 19.685x39.3701 inches
  • Machine Dimensions - 1940x750x2350mm = 76.378x29.5276x92.5197 inches
  • Hydraulic Station Dimensions - 900x800x1060mm = 35.4331x31.4961x41.7323 inches
  • Gross Weight - 4500kg = 9920.76 lbs
Delivery

Build on demand only

Delivery is 7-12 Weeks from Deposit

Catalogue

Machine Specifications may differ to Website display. Catalogue for reference purposes only. To view available builds, please refer to website.

Hydraulic Presses and Iron Workers Catalogue

How to use a Hydraulic Garage Press

To use a hydraulic garage press with 200-ton capacity, follow these steps:

  1. Prepare the workpiece: Place the workpiece on the bed of the press and secure it in place using clamps or fixtures.
  2. Adjust the height: Raise or lower the bed to the desired height using the press's adjustment mechanism.
  3. Check the safety features: Make sure that the press's safety features, such as overload protection, are functioning properly.
  4. Start the pump: Turn on the pump and let it build up pressure.
  5. Apply force: Use the control lever or buttons to apply force to the workpiece. Start with a light pressure and gradually increase the force as needed.
  6. Monitor the process: Observe the workpiece closely as the press applies force, and stop the process if anything seems to be going wrong.
  7. Release the pressure: Once the pressing process is complete, turn off the pump and release the pressure in the cylinders.
  8. Remove the workpiece: Remove the workpiece from the press and inspect it for any damage or deformities.

Note: Always follow the manufacturer's instructions and safety guidelines when using a hydraulic garage press with a 200-ton capacity. Wear protective gear and make sure the press is properly secured before using it.
*Information shown may differ or change without warning*

You may also like

Specialists Since 1982

International Sales

Customizable

Global Support

Search