STANDARD TC-1000 Heavy Duty Horizontal Lathe - STANDARD Direct

Miraco 3d Scanner now under $2000...

Miraco 3d Scanner now under $2000...

STANDARD TC-1000 Series Horizontal Lathes

*Excludes Local Taxes*

Products are built on order, general delivery is 8~16weeks and includes sea freight to most seaports.

Description

Standard TC-1000 Series Heavy duty horizontal lathes for industrial metal turning applications with with a turning weight of 3000kg Between Centers and a max Swing over bed of Ø1000mm (39.4")

  • TC-1000x3000 - Ø1100x3000mm B/C (39.4" x 118" Inch)
  • TC-1000x4000 - Ø1100x4000mm B/C (39.4" x 157" Inch)
  • TC-1000x5000 - Ø1100x5000mm B/C (39.4" x 196" Inch)

A heavy-duty horizontal lathe with a maximum swing over bed of Ø1100mm (43 inches) is a type of metalworking machine tool that is designed to perform large and complex turning operations. This size of lathe is typically used for machining large components, such as turbines, rotors, and other large cylindrical parts.

Such a lathe would typically have a bed length of several meters and a powerful motor to drive the cutting tools at high speeds. It would also have a number of features to ensure precision and accuracy, such as a hydraulic tailstock, a digital readout system, and a quick-change tool post.

In addition to traditional turning operations, these lathes may also be equipped with milling, drilling, and boring capabilities, allowing for a range of operations to be performed on a single machine.

If you are in need of a heavy-duty horizontal lathe for your metalworking operations, I recommend consulting with a specialized dealer or manufacturer to find a machine that meets your specific requirements.

Specifications - Metric Measurements
  • Swing Over Bed - 1000mm
  • Swing over carriage/cross slide - Φ800mm
  • Max swing over gap - Φ1300mm 
  • Center height - 600mm
  • Max. Length of workpiece - 1500mm - 20000mm
  • Spindle bore and nose head - Φ105mm;D11
  • Taper spindle hole front - φ140mm , MT6
  • Max. Load capacity - 2000kg
  • Spindle speed and range - 5.4-720r/min; 18kinds 
  • Longitudinal feed quantities steps and range - 64kinds; 0.06-24.3mm/r
  • Range1:1 - 0.1-1.52mm/r 
  • Range16:1 - 1.6-24.3mm/r 
  • Trace feed range through using gear change - 0.06-0.912mm/r 
  • The ratio of transverse feeding and longitudinal feed - 1:02
  • Rapid move speed of saddle - 4000mm/min 
  • Machine screw pitch - 12mm 
  • Metric thread species, scope - 50kinds, 1-240mm
  • Inch thread species, scope - 26kinds; 14-1 t.p.i
  • Module thread species, range - 53kinds; 0.5-120mm
  • Diametral pitch screw species, scope - 24kinds; 28-1 DP
  • Cross travel of lower knife rest - 500mm
  • Cross travel of upper knife rest - 200mm 
  • Sleeve travel - 250mm 
  • Tailstock sleeve taper - MT6
  • Main motor power - 11kW
  • Rapid move motor power - 1.1kW 
  • Coolant pump power - 90w
  • Guide rail width - 600mm
Specifications - Imperial Measurements
  • Swing Over Bed - 39.4in
  • Swing over carriage/cross slide - 31.5in
  • Max swing over gap - 51.2 in
  • Center height - 23.6 in
  • Max. Length of workpiece - 59.1-787.4 in
  • Spindle bore and nose head - D11; 4.13 in
  • Taper spindle hole front -  MT6; 5.51 in
  • Max. Load capacity - 4409lbs
  • Spindle speed and range - 5.4-720r/min; 18kinds 
  • Longitudinal feed quantities steps and range - 64kinds; 0.0024-0.957 inches per revolution
  • Range1:1 - 0.004-0.06 inches per minute
  • Range16:1 - 0.063-0.957 inches per revolution
  • Trace feed range through using gear change - 0.0024-0.036 inches per revolution
  • The ratio of transverse feeding and longitudinal feed - 1:02
  • Rapid move speed of saddle - 157.5 inches per minute
  • Machine screw pitch - 0.4724 inches
  • Metric thread species, scope - 50kinds, 0.0394-9.4488 inches
  • Inch thread species, scope - 26kinds; 14-1 t.p.i
  • Module thread species, range - 53kinds; 0.0197-4.7244 inches
  • Diametral pitch screw species, scope - 24kinds; 28-1 DP
  • Cross travel of lower knife rest - 19.7 inches
  • Cross travel of upper knife rest - 7.9 inches
  • Sleeve travel - 9.8 inches
  • Tailstock sleeve taper - MT6
  • Main motor power - 14.7hP
  • Rapid move motor power - 1.5hP
  • Coolant pump power - 0.12hP
  • Guide rail width - 23.6 inches


Delivery

Machines are strictly built on order. (Build-on-Demand)

Delivery 9 -14 Weeks from Deposit


How to use a Heavy Duty Horizontal Lathe

A heavy-duty horizontal lathe with a maximum swing over bed of Ø1100mm (43 inches) is a large and robust machine tool designed for heavy machining operations. This type of lathe is typically used for machining large, heavy, and complex components, such as rotors, turbines, and other cylindrical parts.

Some of the key features of this type of lathe include:

  1. Large Swing Over Bed: The maximum swing over bed of Ø1100mm (43 inches) allows for the machining of large parts, providing ample space for tool access and workpiece stability.

  2. Robust Bed: The bed of the lathe is usually made of high-strength cast iron or steel, providing a stable base for the cutting operations and ensuring accuracy.

  3. Power Drive: A powerful motor drives the cutting tools at high speeds, allowing for fast and efficient machining.

  4. Precision: The lathe is equipped with various features to ensure precision and accuracy, such as a hydraulic tailstock, a digital readout system, and a quick-change tool post.

  5. Multi-functional: This type of lathe may be equipped with milling, drilling, and boring capabilities, allowing for a wide range of machining operations to be performed on a single machine.

This type of lathe is typically used in heavy manufacturing and metalworking operations, such as power generation, oil and gas, and heavy equipment manufacturing. It is an essential tool for producing large and complex components, and is capable of performing a variety of machining operations with precision and efficiency.

Description

Standard TC-1000 Series Heavy duty horizontal lathes for industrial metal turning applications with with a turning weight of 3000kg Between Centers and a max Swing over bed of Ø1000mm (39.4")

  • TC-1000x3000 - Ø1100x3000mm B/C (39.4" x 118" Inch)
  • TC-1000x4000 - Ø1100x4000mm B/C (39.4" x 157" Inch)
  • TC-1000x5000 - Ø1100x5000mm B/C (39.4" x 196" Inch)

A heavy-duty horizontal lathe with a maximum swing over bed of Ø1100mm (43 inches) is a type of metalworking machine tool that is designed to perform large and complex turning operations. This size of lathe is typically used for machining large components, such as turbines, rotors, and other large cylindrical parts.

Such a lathe would typically have a bed length of several meters and a powerful motor to drive the cutting tools at high speeds. It would also have a number of features to ensure precision and accuracy, such as a hydraulic tailstock, a digital readout system, and a quick-change tool post.

In addition to traditional turning operations, these lathes may also be equipped with milling, drilling, and boring capabilities, allowing for a range of operations to be performed on a single machine.

If you are in need of a heavy-duty horizontal lathe for your metalworking operations, I recommend consulting with a specialized dealer or manufacturer to find a machine that meets your specific requirements.

Specifications - Metric Measurements
  • Swing Over Bed - 1000mm
  • Swing over carriage/cross slide - Φ800mm
  • Max swing over gap - Φ1300mm 
  • Center height - 600mm
  • Max. Length of workpiece - 1500mm - 20000mm
  • Spindle bore and nose head - Φ105mm;D11
  • Taper spindle hole front - φ140mm , MT6
  • Max. Load capacity - 2000kg
  • Spindle speed and range - 5.4-720r/min; 18kinds 
  • Longitudinal feed quantities steps and range - 64kinds; 0.06-24.3mm/r
  • Range1:1 - 0.1-1.52mm/r 
  • Range16:1 - 1.6-24.3mm/r 
  • Trace feed range through using gear change - 0.06-0.912mm/r 
  • The ratio of transverse feeding and longitudinal feed - 1:02
  • Rapid move speed of saddle - 4000mm/min 
  • Machine screw pitch - 12mm 
  • Metric thread species, scope - 50kinds, 1-240mm
  • Inch thread species, scope - 26kinds; 14-1 t.p.i
  • Module thread species, range - 53kinds; 0.5-120mm
  • Diametral pitch screw species, scope - 24kinds; 28-1 DP
  • Cross travel of lower knife rest - 500mm
  • Cross travel of upper knife rest - 200mm 
  • Sleeve travel - 250mm 
  • Tailstock sleeve taper - MT6
  • Main motor power - 11kW
  • Rapid move motor power - 1.1kW 
  • Coolant pump power - 90w
  • Guide rail width - 600mm
Specifications - Imperial Measurements
  • Swing Over Bed - 39.4in
  • Swing over carriage/cross slide - 31.5in
  • Max swing over gap - 51.2 in
  • Center height - 23.6 in
  • Max. Length of workpiece - 59.1-787.4 in
  • Spindle bore and nose head - D11; 4.13 in
  • Taper spindle hole front -  MT6; 5.51 in
  • Max. Load capacity - 4409lbs
  • Spindle speed and range - 5.4-720r/min; 18kinds 
  • Longitudinal feed quantities steps and range - 64kinds; 0.0024-0.957 inches per revolution
  • Range1:1 - 0.004-0.06 inches per minute
  • Range16:1 - 0.063-0.957 inches per revolution
  • Trace feed range through using gear change - 0.0024-0.036 inches per revolution
  • The ratio of transverse feeding and longitudinal feed - 1:02
  • Rapid move speed of saddle - 157.5 inches per minute
  • Machine screw pitch - 0.4724 inches
  • Metric thread species, scope - 50kinds, 0.0394-9.4488 inches
  • Inch thread species, scope - 26kinds; 14-1 t.p.i
  • Module thread species, range - 53kinds; 0.0197-4.7244 inches
  • Diametral pitch screw species, scope - 24kinds; 28-1 DP
  • Cross travel of lower knife rest - 19.7 inches
  • Cross travel of upper knife rest - 7.9 inches
  • Sleeve travel - 9.8 inches
  • Tailstock sleeve taper - MT6
  • Main motor power - 14.7hP
  • Rapid move motor power - 1.5hP
  • Coolant pump power - 0.12hP
  • Guide rail width - 23.6 inches


Delivery

Machines are strictly built on order. (Build-on-Demand)

Delivery 9 -14 Weeks from Deposit

How to use a Heavy Duty Horizontal Lathe

A heavy-duty horizontal lathe with a maximum swing over bed of Ø1100mm (43 inches) is a large and robust machine tool designed for heavy machining operations. This type of lathe is typically used for machining large, heavy, and complex components, such as rotors, turbines, and other cylindrical parts.

Some of the key features of this type of lathe include:

  1. Large Swing Over Bed: The maximum swing over bed of Ø1100mm (43 inches) allows for the machining of large parts, providing ample space for tool access and workpiece stability.

  2. Robust Bed: The bed of the lathe is usually made of high-strength cast iron or steel, providing a stable base for the cutting operations and ensuring accuracy.

  3. Power Drive: A powerful motor drives the cutting tools at high speeds, allowing for fast and efficient machining.

  4. Precision: The lathe is equipped with various features to ensure precision and accuracy, such as a hydraulic tailstock, a digital readout system, and a quick-change tool post.

  5. Multi-functional: This type of lathe may be equipped with milling, drilling, and boring capabilities, allowing for a wide range of machining operations to be performed on a single machine.

This type of lathe is typically used in heavy manufacturing and metalworking operations, such as power generation, oil and gas, and heavy equipment manufacturing. It is an essential tool for producing large and complex components, and is capable of performing a variety of machining operations with precision and efficiency.

*Information shown may differ or change without warning*

Product Search

Description

Standard TC-1000 Series Heavy duty horizontal lathes for industrial metal turning applications with with a turning weight of 3000kg Between Centers and a max Swing over bed of Ø1000mm (39.4")

  • TC-1000x3000 - Ø1100x3000mm B/C (39.4" x 118" Inch)
  • TC-1000x4000 - Ø1100x4000mm B/C (39.4" x 157" Inch)
  • TC-1000x5000 - Ø1100x5000mm B/C (39.4" x 196" Inch)

A heavy-duty horizontal lathe with a maximum swing over bed of Ø1100mm (43 inches) is a type of metalworking machine tool that is designed to perform large and complex turning operations. This size of lathe is typically used for machining large components, such as turbines, rotors, and other large cylindrical parts.

Such a lathe would typically have a bed length of several meters and a powerful motor to drive the cutting tools at high speeds. It would also have a number of features to ensure precision and accuracy, such as a hydraulic tailstock, a digital readout system, and a quick-change tool post.

In addition to traditional turning operations, these lathes may also be equipped with milling, drilling, and boring capabilities, allowing for a range of operations to be performed on a single machine.

If you are in need of a heavy-duty horizontal lathe for your metalworking operations, I recommend consulting with a specialized dealer or manufacturer to find a machine that meets your specific requirements.

Specifications - Metric Measurements
  • Swing Over Bed - 1000mm
  • Swing over carriage/cross slide - Φ800mm
  • Max swing over gap - Φ1300mm 
  • Center height - 600mm
  • Max. Length of workpiece - 1500mm - 20000mm
  • Spindle bore and nose head - Φ105mm;D11
  • Taper spindle hole front - φ140mm , MT6
  • Max. Load capacity - 2000kg
  • Spindle speed and range - 5.4-720r/min; 18kinds 
  • Longitudinal feed quantities steps and range - 64kinds; 0.06-24.3mm/r
  • Range1:1 - 0.1-1.52mm/r 
  • Range16:1 - 1.6-24.3mm/r 
  • Trace feed range through using gear change - 0.06-0.912mm/r 
  • The ratio of transverse feeding and longitudinal feed - 1:02
  • Rapid move speed of saddle - 4000mm/min 
  • Machine screw pitch - 12mm 
  • Metric thread species, scope - 50kinds, 1-240mm
  • Inch thread species, scope - 26kinds; 14-1 t.p.i
  • Module thread species, range - 53kinds; 0.5-120mm
  • Diametral pitch screw species, scope - 24kinds; 28-1 DP
  • Cross travel of lower knife rest - 500mm
  • Cross travel of upper knife rest - 200mm 
  • Sleeve travel - 250mm 
  • Tailstock sleeve taper - MT6
  • Main motor power - 11kW
  • Rapid move motor power - 1.1kW 
  • Coolant pump power - 90w
  • Guide rail width - 600mm
Specifications - Imperial Measurements
  • Swing Over Bed - 39.4in
  • Swing over carriage/cross slide - 31.5in
  • Max swing over gap - 51.2 in
  • Center height - 23.6 in
  • Max. Length of workpiece - 59.1-787.4 in
  • Spindle bore and nose head - D11; 4.13 in
  • Taper spindle hole front -  MT6; 5.51 in
  • Max. Load capacity - 4409lbs
  • Spindle speed and range - 5.4-720r/min; 18kinds 
  • Longitudinal feed quantities steps and range - 64kinds; 0.0024-0.957 inches per revolution
  • Range1:1 - 0.004-0.06 inches per minute
  • Range16:1 - 0.063-0.957 inches per revolution
  • Trace feed range through using gear change - 0.0024-0.036 inches per revolution
  • The ratio of transverse feeding and longitudinal feed - 1:02
  • Rapid move speed of saddle - 157.5 inches per minute
  • Machine screw pitch - 0.4724 inches
  • Metric thread species, scope - 50kinds, 0.0394-9.4488 inches
  • Inch thread species, scope - 26kinds; 14-1 t.p.i
  • Module thread species, range - 53kinds; 0.0197-4.7244 inches
  • Diametral pitch screw species, scope - 24kinds; 28-1 DP
  • Cross travel of lower knife rest - 19.7 inches
  • Cross travel of upper knife rest - 7.9 inches
  • Sleeve travel - 9.8 inches
  • Tailstock sleeve taper - MT6
  • Main motor power - 14.7hP
  • Rapid move motor power - 1.5hP
  • Coolant pump power - 0.12hP
  • Guide rail width - 23.6 inches


Delivery

Machines are strictly built on order. (Build-on-Demand)

Delivery 9 -14 Weeks from Deposit

How to use a Heavy Duty Horizontal Lathe

A heavy-duty horizontal lathe with a maximum swing over bed of Ø1100mm (43 inches) is a large and robust machine tool designed for heavy machining operations. This type of lathe is typically used for machining large, heavy, and complex components, such as rotors, turbines, and other cylindrical parts.

Some of the key features of this type of lathe include:

  1. Large Swing Over Bed: The maximum swing over bed of Ø1100mm (43 inches) allows for the machining of large parts, providing ample space for tool access and workpiece stability.

  2. Robust Bed: The bed of the lathe is usually made of high-strength cast iron or steel, providing a stable base for the cutting operations and ensuring accuracy.

  3. Power Drive: A powerful motor drives the cutting tools at high speeds, allowing for fast and efficient machining.

  4. Precision: The lathe is equipped with various features to ensure precision and accuracy, such as a hydraulic tailstock, a digital readout system, and a quick-change tool post.

  5. Multi-functional: This type of lathe may be equipped with milling, drilling, and boring capabilities, allowing for a wide range of machining operations to be performed on a single machine.

This type of lathe is typically used in heavy manufacturing and metalworking operations, such as power generation, oil and gas, and heavy equipment manufacturing. It is an essential tool for producing large and complex components, and is capable of performing a variety of machining operations with precision and efficiency.

*Information shown may differ or change without warning*