Standard HG2-100Ton Hydraulic Garage Press with Dual Hydraulic Cylinders:
A 100 ton hydraulic garage press with dual hydraulic cylinders is a heavy-duty industrial machine used for metalworking and automotive repair. It features two hydraulic cylinders, which provide equal and balanced force to the workpiece, resulting in a more efficient and precise operation. The press is capable of exerting 100 tons of force, making it suitable for heavy-duty tasks such as straightening and shaping metal, removing and installing bearings, and pressing fittings. This type of press is commonly found in industrial settings and automotive repair shops, and it requires a power source, such as an electrical outlet or a hydraulic pump, to operate.
Delivery 8-12 weeks from Deposit
Using a 100 ton hydraulic garage press with dual hydraulic cylinders involves the following steps:
Set up the press: Ensure that the press is securely fastened to the floor and that it's level. Check the hydraulic fluid levels and make sure that the power source is connected and functioning properly.
Prepare the workpiece: Clean the workpiece and make sure that it is free of dirt and debris. Place it in a secure fixture or clamp if necessary.
Adjust the height: Use the control lever to adjust the height of the press bed to accommodate the workpiece.
Apply pressure: Start the press and activate the hydraulic system using the control lever. Observe the workpiece and monitor the pressure gauge to ensure that it reaches the desired level.
Complete the operation: Once the operation is complete, release the pressure using the control lever. Remove the workpiece and clean the press bed.
It's important to follow all safety precautions when using a 100 ton hydraulic garage press, including wearing protective equipment, such as safety glasses and gloves, and never reaching under the press bed while it's in operation.
*Information shown may differ or change without warning*