Standard AF-3C Pneumatic Feeder with E&R Valve:
The AF pneumatic air feeder machine is an efficient and economical coil feeder solutions for power press machines. It is able to feed sheet metal strips up to 3.0mm, width up to 400mm, with the speed of 12m/min. Having a group of stock guide rollers to adjust for different stock width, offering a feeding length adjustment screw for different coil feeding applications. The air feeder machine is cheaper than the roller feeders and it's the right choice for the feeder line that does not need very high precision performance.
Due to the many options offered, these machines are strictly built on order. Feel free to customize and build your ideal machine.
Delivery 10-14 Weeks from Deposit
A pneumatic feeder is a device used to move and control the flow of materials in a manufacturing or industrial setting. An E&R valve is an electronic control valve that is used to regulate the flow of air or other gases. When used together, a pneumatic feeder and E&R valve can help automate the process of moving materials and controlling the flow of air or other gases.
Here are the steps to use a pneumatic feeder with an E&R valve:
Install the pneumatic feeder and E&R valve: Install the pneumatic feeder and E&R valve in the appropriate locations in your manufacturing or industrial setting. Make sure that they are securely attached and properly wired.
Connect the pneumatic feeder to the E&R valve: Connect the pneumatic feeder to the E&R valve using the appropriate tubing and fittings. The connections should be secure and leak-free.
Set up the E&R valve: Set up the E&R valve according to the manufacturer's instructions. This will typically involve configuring the valve to the appropriate settings for your application, such as the desired flow rate or pressure.
Configure the pneumatic feeder: Configure the pneumatic feeder to work with the E&R valve. This will typically involve adjusting the feeder's settings to ensure that it is supplying the appropriate amount of material based on the flow rate and pressure set by the E&R valve.
Test the system: Test the pneumatic feeder and E&R valve to ensure that they are working properly. This may involve running a test cycle to move materials through the system and verifying that the flow rate and pressure are correct.
Monitor and adjust as necessary: Monitor the system during operation and adjust the settings as necessary to maintain the desired flow rate and pressure. This may involve making small adjustments to the E&R valve or pneumatic feeder to ensure that they are working together optimally.
Overall, using a pneumatic feeder with an E&R valve can help automate the process of moving materials and controlling the flow of air or other gases in a manufacturing or industrial setting. With the proper setup and configuration, this system can help improve efficiency and accuracy while reducing the need for manual labor.
*Information shown may differ or change without warning*